Exhaust cutout valve 4" (102mm)
Universal-2
Reviews
Help others choose right. Be the first to write a review!
Write a reviewExhaust cutout valve 4" (102mm)
Stainless exhaust cut out valve controlled by a remote control.
The valve opens or closes by pressing the remote control.
It is possible to connect 2 exhaust valves to the same remote control.
You can also control the valve by connecting it to a button/ECU using a relay.
Parts included:
- Pipe split / branching
- Valve with motor
- V-band
- Angled exhaust bend
- Control electronics with remote control
Dimensions:
A: 247mm
B: 240mm
C: 260mm
ATTENTION!
It is important to check the damper and clean if necessary, use rust protection if possible and use teroson glue or a similar product where the cable enters the rubber seal behind the damper motor. Be extra careful during the winter period.
Also check that the damper moves easily after assembly, welding and "hard" tightening can cause the material to seize and the damper does not move easily. Also use Loctite on bolts that should be fixed.
----------------
Guides & Info
Be first to write a review about this product!
Your review:
To send a review, you must be logged in.
Associated products
Cable
